Skip to content

Biomass, Gas and Carbon

The rules on this page prepare the regional potentials and infrastructure of the carriers that are not electricity: biomass potentials and transport costs, the gas network with its entry points, salt caverns for hydrogen storage and geological CO2 sequestration potentials. See Biomass, Methane, Hydrogen and Carbon management in the design section.

Biomass

build_biomass_potentials

Computes biogas and solid biomass potentials per clustered region from JRC ENSPRESO data.

Script, inputs, outputs and settings
  • Script: scripts/build_biomass_potentials.py
  • Inputs: output of retrieve_enspreso_biomass, resources/eurostat_energy_balances.csv, output of retrieve_eu_nuts_2013, resources/onshore_regions.geojson, output of retrieve_nuts3_population, depends on configuration, output of retrieve_bfs_gdp_and_population, resources/country_shapes.geojson
  • Outputs: resources/biomass_potentials_all_{horizon}.csv, resources/biomass_potentials_{horizon}.csv
  • Settings: biomass
  • Wildcards: {horizon}

Build biogas and solid biomass potentials per clustered model region from JRC ENSPRESO.

ENSPRESO gives sustainable biomass potentials per commodity at NUTS2 level for a chosen scenario and year; years between the available decades are linearly interpolated. Commodities only reported at country level are disaggregated to NUTS2 by population. Potentials are mapped to model regions by area overlap and grouped into the configured biomass classes. Unsustainable potentials are estimated from the Eurostat primary production of solid biofuels, biogas and bioliquids, allocated to regions by their share of the sustainable potential, and scaled by year-dependent shares that phase them out. The potentials limit the biomass supply in the sector-coupled network.

References

build_biomass_transport_costs

Converts JRC biomass transport costs per country into EUR per km and MWh.

Script, inputs, outputs and settings

Build biomass transport costs per country in EUR per km and MWh.

Transport costs per tonne-kilometre for two supply chains are read from tables extracted from the JRC-EU-TIMES bioenergy report and averaged. The average is converted from EUR/(km t) to EUR/(km MWh) using the energy content of wood pellets (4.8 MWh/t). Norway, which the report does not cover, takes the value of Sweden.

References

Gas network and hydrogen storage

build_gas_network

Preprocesses the SciGRID_gas transmission network into cleaned pipeline segments.

Script, inputs, outputs and settings

Clean the SciGRID_gas pipeline dataset into a table of gas transmission pipelines.

Pipeline attributes nested in the SciGRID_gas GeoJSON are unpacked and converted to model units: maximum daily flow to capacity in MW, line ends to point coordinates. Where SciGRID_gas inferred a diameter, 500 mm is assumed. Capacities that deviate strongly from the diameter-based estimate of the European Hydrogen Backbone report are replaced by that estimate, lengths that deviate strongly from the great-circle distance are replaced by 1.5 times that distance, and short pipelines are treated as bidirectional. A later rule clusters the cleaned table to model regions.

References

build_gas_input_locations

Builds fossil gas import locations from entry points, LNG terminals and production sites.

Script, inputs, outputs and settings
  • Script: scripts/build_gas_input_locations.py
  • Inputs: data/gem/Europe-Gas-Tracker-2024-05.xlsx, output of retrieve_gas_infrastructure_data, resources/onshore_regions.geojson, resources/offshore_regions.geojson
  • Outputs: resources/gas_input_locations.geojson, resources/gas_input_locations_simplified.csv

Build locations and capacities of fossil gas supply into the modelled gas network.

Four kinds of gas input are collected: LNG import terminals and gas production fields from the Global Energy Monitor Europe Gas Tracker, and pipeline entry points and storage sites from SciGRID_gas. Pipeline entries are kept only where they cross the model boundary, excluding those from Russia and Belarus; regions of eastern countries are buffered so that entry points just beyond the border are still matched. Production capacity is taken from reported production, falling back to design capacity or 3% of reserves per year. Capacities are converted to MW (storage volumes to GWh) and assigned to model regions by location, which sets the gas supply and storage options of the sector-coupled network.

cluster_gas_network

Clusters the gas transmission network pipelines to clustered model regions.

Script, inputs, outputs and settings
  • Script: scripts/cluster_gas_network.py
  • Inputs: resources/gas_network.csv, resources/onshore_regions.geojson, resources/offshore_regions.geojson
  • Outputs: resources/gas_network_clustered.csv

Cluster the cleaned gas transmission pipelines to the model regions.

Each pipeline end point is assigned to the onshore or offshore region it lies in, and the length is replaced by the great-circle distance between region centroids times a detour factor. Pipelines with an end outside all regions or with both ends in the same region are dropped. Parallel pipelines between the same pair of regions are merged, summing their capacities; unidirectional pipelines get a lower flow limit of zero. The result becomes the gas pipeline links of the sector-coupled network.

build_salt_cavern_potentials

Builds hydrogen storage potentials in salt caverns per region split by onshore and offshore.

Script, inputs, outputs and settings
  • Script: scripts/build_salt_cavern_potentials.py
  • Inputs: output of retrieve_h2_salt_caverns, resources/onshore_regions.geojson, resources/offshore_regions.geojson
  • Outputs: resources/salt_cavern_potentials.csv

Build hydrogen storage potentials of salt caverns per clustered region in TWh.

Potential cavern sites with their energy density from Caglayan et al. (2020) are overlaid with the onshore and offshore regions. Each site's potential is its energy density times its area, and the share of the site falling into a region is credited to that region. Potentials are reported separately for onshore sites, nearshore sites within 50 km of the coast and offshore sites.

Data provenance

The site map was digitised from Figure 6 of the paper and scaled to the country totals of Figure 7, split by onshore, nearshore and offshore.

References

Carbon sequestration

build_co2_sequestration_potentials

Builds geological CO2 sequestration potential shapes from the CO2Stop database.

Script, inputs, outputs and settings

Build a map of geological CO2 storage capacities from the CO2Stop database.

Storage units and traps from CO2Stop are joined with their capacity tables. Conservative, neutral and optimistic estimates in Mt are derived from the minimum, mean and maximum capacity columns; missing values fall back to the next more conservative estimate. Trap capacities sum the aquifer, oil and gas contributions. Both sets are merged into one map with 2D geometries, which a later rule clusters to model regions.

build_clustered_co2_sequestration_potentials

Aggregates geological CO2 sequestration potentials to clustered model regions.

Script, inputs, outputs and settings

Allocate geological CO2 sequestration potentials to clustered model regions.

Storage unit polygons from CO2Stop with the configured capacity estimate (conservative, neutral or optimistic) are overlaid with the offshore regions and, optionally, the onshore regions. Each unit's capacity is split between regions in proportion to the overlapped area. Units and regional totals below the configured minimum size are dropped. The result limits how much CO2 can be stored underground per region in the sector-coupled network.